Kition
cadMechanical Parts· featured

Pipe Flange DN100

A front view and a hatched section of a bolted pipe flange at 1:2, with an eight-hole bolt circle, centre lines, diameters and a title block.

Pipe Flange DN100 — CAD sample rendered by Kition

Drawn at half size on an A4 sheet: the dimension style's DIMLFAC of 2 makes every dimension read full size. One bolt hole is copied round the pitch circle with arraypolar; section A–A is four closed polylines filled with ANSI31; centre lines sit on a red CENTER layer. Two dimensions carry a text override ("8X Ø18" and "Ø130"), which the check notes as information.

Steps

64 commands
showcase.yaml65 lines
steps:
  - {"command": "grid", "params": {"on": false}}
  - {"command": "lwdisplay", "params": {"on": true}}
  - {"command": "limits", "params": {"min": [0, 0], "max": [297, 210]}}
  - {"command": "linetype", "params": {"load": "CENTER"}}
  - {"command": "linetype", "params": {"load": "HIDDEN"}}
  - {"command": "linetype", "params": {"load": "DASHED"}}
  - {"command": "linetype", "params": {"load": "PHANTOM"}}
  - {"command": "dimstyle", "params": {"name": "Mech-1to2", "DIMTXT": 2.8, "DIMASZ": 2.5, "DIMEXO": 1, "DIMEXE": 1.5, "DIMGAP": 0.8, "DIMDEC": 0, "DIMLFAC": 2}, "as": "dimstyle"}
  - {"command": "layer.new", "params": {"name": "Border", "color": "7", "lineweight": "0.70"}}
  - {"command": "layer.new", "params": {"name": "Outline", "color": "7", "lineweight": "0.50"}}
  - {"command": "layer.new", "params": {"name": "Thin", "color": "7", "lineweight": "0.18"}}
  - {"command": "layer.new", "params": {"name": "Center", "color": "1", "linetype": "CENTER"}}
  - {"command": "layer.new", "params": {"name": "Hatch", "color": "8"}}
  - {"command": "layer.new", "params": {"name": "Dims", "color": "5"}}
  - {"command": "layer.new", "params": {"name": "Text", "color": "7"}}
  - {"command": "ltscale", "params": {"scale": 0.4}}
  - {"command": "layer.current", "params": {"name": "Outline"}}
  - {"command": "circle", "params": {"center": [78, 112], "radius": 55.0}, "as": "od"}
  - {"command": "circle", "params": {"center": [78, 112], "radius": 32.5}, "as": "hub"}
  - {"command": "circle", "params": {"center": [78, 112], "radius": 25.0}, "as": "bore"}
  - {"command": "circle", "params": {"center": [119.5745789630079, 129.22075445642903], "radius": 4.5}, "as": "hole"}
  - {"command": "arraypolar", "params": {"handles": ["$hole.handle"], "center": [78, 112], "count": 8, "angle": 360}, "as": "holes"}
  - {"command": "layer.current", "params": {"name": "Center"}}
  - {"command": "circle", "params": {"center": [78, 112], "radius": 45.0}, "as": "pcd"}
  - {"command": "centermark", "params": {"handle": "$od.handle"}}
  - {"command": "layer.current", "params": {"name": "Outline"}}
  - {"command": "pline", "params": {"points": [[190.0, 137.0], [222.0, 137.0], [222.0, 144.5], [202.0, 144.5], [202.0, 152.5], [190.0, 152.5]], "closed": true}, "as": "sec0"}
  - {"command": "pline", "params": {"points": [[190.0, 161.5], [202.0, 161.5], [202.0, 167.0], [190.0, 167.0]], "closed": true}, "as": "sec1"}
  - {"command": "pline", "params": {"points": [[190.0, 87.0], [222.0, 87.0], [222.0, 79.5], [202.0, 79.5], [202.0, 71.5], [190.0, 71.5]], "closed": true}, "as": "sec2"}
  - {"command": "pline", "params": {"points": [[190.0, 62.5], [202.0, 62.5], [202.0, 57.0], [190.0, 57.0]], "closed": true}, "as": "sec3"}
  - {"command": "layer.current", "params": {"name": "Hatch"}}
  - {"command": "hatch", "params": {"handles": ["$sec0.handle", "$sec1.handle", "$sec2.handle", "$sec3.handle"], "pattern": "ANSI31", "scale": 0.5}}
  - {"command": "layer.current", "params": {"name": "Center"}}
  - {"command": "line", "params": {"points": [[186.0, 112.0], [226.0, 112.0]]}}
  - {"command": "line", "params": {"points": [[187.0, 157.0], [205.0, 157.0]]}}
  - {"command": "line", "params": {"points": [[187.0, 67.0], [205.0, 67.0]]}}
  - {"command": "layer.current", "params": {"name": "Thin"}}
  - {"command": "pline", "params": {"points": [[78, 172], [78, 178]], "width": 0.6}}
  - {"command": "pline", "params": {"points": [[78, 52], [78, 46]], "width": 0.6}}
  - {"command": "layer.current", "params": {"name": "Dims"}}
  - {"command": "dimdiameter", "params": {"handle": "$od.handle", "at": [16, 158]}, "as": "d_od"}
  - {"command": "dimdiameter", "params": {"handle": "$bore.handle", "at": [64, 96]}, "as": "d_bore"}
  - {"command": "dimdiameter", "params": {"handle": "$pcd.handle", "at": [118, 74]}, "as": "d_pcd"}
  - {"command": "dimdiameter", "params": {"handle": "$hole.handle", "at": [140, 152]}, "as": "d_hole"}
  - {"command": "properties.set", "params": {"handles": ["$d_hole.handle"], "textOverride": "8X Ø18"}}
  - {"command": "dimlinear", "params": {"p1": [190.0, 167.0], "p2": [202.0, 167.0], "at": [196, 176]}, "as": "d_t"}
  - {"command": "dimlinear", "params": {"p1": [190.0, 57.0], "p2": [222.0, 79.5], "at": [206, 48]}, "as": "d_len"}
  - {"command": "dimlinear", "params": {"p1": [222.0, 79.5], "p2": [222.0, 144.5], "at": [236, 112]}, "as": "d_hubd"}
  - {"command": "properties.set", "params": {"handles": ["$d_hubd.handle"], "textOverride": "Ø130"}}
  - {"command": "layer.current", "params": {"name": "Text"}}
  - {"command": "text", "params": {"at": [78, 180], "text": "A", "height": 4, "justify": "BC"}}
  - {"command": "text", "params": {"at": [78, 40], "text": "A", "height": 4, "justify": "BC"}}
  - {"command": "text", "params": {"at": [206, 186], "text": "SECTION A–A", "height": 3.5, "justify": "BC"}}
  - {"command": "layer.current", "params": {"name": "Border"}}
  - {"command": "rectang", "params": {"p1": [10, 10], "p2": [287, 200]}}
  - {"command": "rectang", "params": {"p1": [167, 10], "p2": [287, 34]}}
  - {"command": "layer.current", "params": {"name": "Thin"}}
  - {"command": "line", "params": {"points": [[167, 22], [287, 22]]}}
  - {"command": "line", "params": {"points": [[237, 10], [237, 22]]}}
  - {"command": "layer.current", "params": {"name": "Text"}}
  - {"command": "text", "params": {"at": [171, 26], "text": "PIPE FLANGE DN100 PN16", "height": 4}}
  - {"command": "text", "params": {"at": [171, 14.5], "text": "S235JR STEEL", "height": 3}}
  - {"command": "text", "params": {"at": [241, 14.5], "text": "SCALE 1:2   A4", "height": 3}}
  - {"command": "drawing.inspect", "params": {}, "as": "di"}

Checks

5 checks on every build
  • inspect.layers = {"any":{"name":"Center"},"count":9}
  • results.di.counts = {"Circle":12,"Hatch":1,"Dimension":7,"Polyline":8}
  • results.dimstyle.current = "Mech-1to2"
  • Diagnostics: cad.dimension-text-overridden, cad.dimension-text-overridden
  • The saved document opens again, and its thumbnail matches thumb.png within the render tolerance

Related

More CAD samples
cadMechanical Parts

L-Bracket in Three Views

A bent steel angle bracket in third-angle projection - front, top and right views - with hidden lines, centre lines, a fillet and dimensions.

50 objects; 8 layers
cadMechanical Parts

Spur Gear Profile

An involute spur gear, module 4 with 24 teeth, drawn as one closed polyline with a keyed bore, pitch circle and a gear data table.

14 objects; 7 layers
cadDimensions & Annotation

Dimensioned Mounting Plate

One plate dimensioned seven ways - ordinate, baseline, aligned, angular, radius, diameter and linear - with centre marks and multileader notes.

35 objects; 7 layers
cadFloor Plans

Two-Bedroom Apartment Plan

A 1:50 apartment floor plan with solid-filled walls, door swings, windows, furniture, room names with areas and dimensions.

95 objects; 9 layers